The purpose of our project is to develop a “space-ready” compact 3D CZT detector module system based on drift strip detector technology which will be suitable for future hard X–ray/soft gamma-ray astrophysical missions. The goal of the PhD project is to further develop the 3D CZT drift strip detectors as building blocks for future high energy astronomy. By combining requirements from different high energy mission instruments and through the investigation of high timing, spectral and spatial resolution from the 3D CZT detector experimental data, the project aims to develop for the first time new generation high resolution, space ready detector modules to be used for future high energy missions
Candidates should have a master's degree in engineering or a similar degree with an academic level equivalent to the master's degree in engineering
PhD position in Instrumentation for Hard X-ray and Gamma-ray Astrophysics DTU Space Del til Facebook Del til Twitter Del til LinkedIn Monday 11 Feb 19 Apply for this job Apply no later than 25 February 2019 Apply for the job at DTU Space by completing the following form. Apply online The Section for Astrophysics and Atmospheric Physics at DTU Space offers a PhD position in Instrumentation for Hard X-ray and Gamma-ray Astrophysics. The proposed PhD project will be part of the research on development of 3D CZT drift strip detectors conducted by the DTU Space detector group. The instrumentation for high energy telescopes (> 100 keV) requires detectors of high efficiency, high energy resolution and the capability of 3D position sensitivity. A fine spectroscopic performance combined with sub mm position resolution will make it possible to perform 3D reconstructions of the photon interaction in sub-mm, a feature which is essential and can be utilized for future new instrumentation working in the energy range from the 20keV to a few MeV regions. DTU Space has a strong position in instrument development for astrophysics primarily based on space missions and several decades heritage of participation in astrophysical satellites. Current satellites include INTEGRAL , PLANCK , NuSTAR , ASIM and in the near future we also participate in JWST , EUCLID and ATHENA . More specifically for the advertised PhD project, the group of Astrophysics is also involved in a project in collaboration with Kromek, UK, funded under the Horizon 2020 / Eurostars for development of a new generation Molecular Breast Imager using the DTU Space developed 3D CZT detector sensor technology. Responsibilities and tasks The purpose of our project is to develop a “space-ready” compact 3D CZT detector module system based on drift strip detector technology which will be suitable for future hard X-ray/soft gamma-ray astrophysical missions. The goal of the PhD project is to further develop the 3D CZT drift strip detectors as building blocks for future high energy astronomy. By combining requirements from different high energy mission instruments and through the investigation of high timing, spectral and spatial resolution from the 3D CZT detector experimental data, the project aims to develop for the first time new generation high resolution, space ready detector modules to be used for future high energy missions. Qualifications Candidates should have a master's degree in engineering or a similar degree with an academic level equivalent to the master's degree in engineering. The successful candidate is expected to mainly perform the following tasks: 3D CZT detector algorithm optimization and characterization Measurements and data analysis of 3D CdZnTe drift strip X-ray and Gamma-ray detectors Artificial Neural Network (ANN) design and HW implementation of the 3D CZT algorithm Design and performance simulation of scientific instrumentation for high energy astronomy Write half-year progress reports Disseminate results at conferences and through scientific articles Teaching duties (up to 15% of working time) Attend PhD courses (30 ECTS) A mandatory research stay during a semester abroad is to be foreseen. Approval and Enrolment The scholarships for the PhD degree are subject to academic approval, and the candidates will be enrolled in one of the general degree programmes of DTU. For information about the general requirements for enrolment and the general planning of the scholarship studies, please see the DTU PhD Guide . Assessment The successful candidate has outstanding analytical and problem solving skills to become a committed researcher with a drive for excellence. Experience on measurements and data analysis of X-ray and Gamma-ray detectors will be an advantage. The assessment of the applicants will be made by Senior scientist Irfan Kuvvetli. Interviews are foreseen to take place during the first week of March 2019. We offer DTU is a leading technical university globally recognized for the excellence of its research, education, innovation and scientific advice. We offer a rewarding and challenging job in an international environment. We strive for academic excellence in an environment characterized by collegial respect and academic freedom tempered by responsibility. Salary and appointment terms The appointment will be based on the collective agreement with the Danish Confederation of Professional Associations. The allowance will be agreed upon with the relevant union. The period of employment is 3 years. You can read more about career paths at DTU here . Further information Further information may be obtained from Senior Scientist Irfan Kuvvetli (email@example.com), 45 4525 9720. You can read more about DTU Space on www.space.dtu.dk Application Please submit your online application no later than 25 Feburary 2019 . To apply, please open the link "Apply online", fill out the online application form. The following must be attached in English : A letter motivating the application (cover letter) Curriculum vitae Grade transcripts and BSc/MSc diploma Excel sheet with translation of grades to the Danish grading system (see guidelines and Excel spreadsheet here ) Candidates may apply prior to obtaining their master's degree but cannot begin before having received it. Applications and enclosures received after the deadline will not be considered. All interested candidates irrespective of age, gender, race, disability, religion or ethnic background are encouraged to apply. DTU Space has about 145 employees, an annual turn-over of about 130 MDKK and it is located at the Lyngby Campus of the Technical University of Denmark together with 19 other institutes within the technical sciences. As the National Space Institute, DTU Space is the leading institution of public space activities in Denmark. The mission of the Institute is to conduct research, development, public sector consultancy, education and innovation at the highest international level within the following areas: Space Technology & Instrumentation, Earth Observation & Geoscience and Space- & Astro-physics. In the Astrophysics and Atmospheric Division, current focus areas cover large-scale structure of the universe, physics of compact objects, space weather, upper atmosphere physics and cosmo-climatology as well as development of instrumentation, in particular high-energy instrumentation, i.e. X- and gamma ray detectors and -optics. The division is currently active in operation of instruments on and data analysis from three satellites. The division also runs four instrumentation laboratories and hosts a center for space weather research and forecasts. DTU is a technical university providing internationally leading research, education, innovation and scientific advice. Our staff of 6,000 advance science and technology to create innovative solutions that meet the demands of society; and our 11,200 students are being educated to address the technological challenges of the future. DTU is an independent academic university collaborating globally with business, industry, government, and public agencies.
Please click here, if the Job didn't load correctly.
Please wait. You are being redirected to the Job in 3 seconds.